Impact Fee Estimator

CONTACT

Contact:

  • Engineering Technician
  • 201 S Cortez St

  • 928-777-1269

Ordinance No. 2019-1662 adopting and amending Development Impact Fees (Impact Fees) for the City of Prescott, went into effect on August 1, 2019. Six Impact Fees were adopted, a “Development Fees for Fire”, a “Development Fees for Police”, a “Development Fees for Streets”, a “Water Resource Development Fee”, a “Development Fees for Water System Impacts”, and a “Development Fees for Wastewater System Impacts”.

NON-UTILITY DEVELOPMENT IMPACT FEES

The amount of each non-utility impact fee is based on both the type of use and the square footage of the building. The tables below break down each Non-Utility Development Impact fee type.

For residential use buildings, including apartments and single family homes (site built, modular, manufactured, and mobile) the livable square feet is the square footage of a residential unit under roof that is used for living, sleeping, eating, and cooking.

For non-residential use buildings, including industrial buildings, offices and other services, retail and restaurants, and hotels or motels, the fee is based on the total square footage of the structure.

Development Fees for Fire

Residential (per Residential unit by livable square feet (sf))Fee
1,800 sf or less$187
1,801-2,600 sf$291
2,601 sf or more$343
Non-Residential (per square foot (sf)
Industrial$0.19
Office and Other Services$0.35
Retail and Restaurants$0.28

Development Fees for Police

Residential (per Residential unit by livable square feet (sf))Fee
1,800 sf or less$212
1,801-2,600 sf$328
2,601 sf or more$388
Non-Residential (per square foot (sf)
Industrial$0.14
Office and Other Services$0.28
Retail and Restaurants$0.72

Development Fees for Streets

Residential (per Residential unit by livable square feet (sf))Fee
1,800 sf or less$672
1,801-2,600 sf$1040
2,601 sf or more$1222
Non-Residential (per square foot (sf)
Industrial$0.51
Office and Other Services$1.01
Retail and Restaurants$2.33

UTILITY DEVELOPMENT IMPACT FEES

The amount of each utility impact fee is based on both the size of the meter and the service area in which the parcel is located. Most (but not all) single-family residential properties will use a 5/8” water meter. The size of the water meter is primarily based on the number of fixture units within the structure. In the event that a one-inch meter is required solely as a result of being equipped with an automatic fire sprinkler system, the Impact Fees to be assessed shall be 5/8″ meter size. To estimate the cost of the Utility Impact Fees, enter a parcel number into the estimator below. If you don’t know your parcel number you can look it up on the Yavapai County GIS Website.

The estimator tool is for “Utility Impact Fees” only, the total shown below does NOT include any “non-utility impact fees”, building permitting fees, the cost of the physical meter, tax on the meter or tapping fees. Also, if there is no box and yoke on the property or the box and yoke is required to be upsized, additional fees are required for these services. Please call 928-777-1269 if you have questions.

Please search for property information using the form below.

Search by Parcel Number
--

Please search for property information using the form above.

Documents

Ordinance 4889-1427

Ordinance 4916-1454